S-PAUL CA+20 เพาเวอร์แอมป์ Power Amplifier
ติดต่อสอบถาม
.jpg)
Features:
In order to provide a strong, pure sound quality and design, CA+ series truly reflects the brand concept for SOUNDPAUL.
With the superior performance of the core FTD class aplifier technology; this is a breakthrough amplifier technoogy, enables high-efficiency Class D amplifier products to maintain the pristine sound quality of a Class AB amplifier.
CA+ series adopts ON plastic tube in design, optimized the entire system better, to meet the various needs with more precise.
The CA + series come with VPL adjustable output voltage limiter, and this amplifier is applied to any system.
All-round protection systems: with over current, DC, the ultra-high frequency (VHF), short-circuits, the main power fuse protection circuitry and soft start circuitry.
In order to maintain a suitable working temperature under extremely harsh conditions.The CA + series use the Louvered copper sheets to enhance the rapid cooling ability for the cooling of exposed components, and, all cooling components are located in the same air flow cross-section, in order to get the same cooling effect, while the CA + series power amplifier products it is sufficient to meet all the high-end positioning projects.
Specifications:
MODEL
|
CA+20
|
220V-50Hz ALL channels driven output power(THD=1%)
|
8Ω Stereo Output Power
|
1300W
|
4Ω Stereo Output Power
|
2000W
|
** 2Ω Stereo Output Power
|
3600W
|
8Ω Bridged
|
4070W
|
**4Ω Bridged
|
7150W
|
Frequency response(1W,8ohms)+0/-3dB
|
10Hz-20KHz
|
THD+N 20Hz-20KHz
|
<0.1%
|
S/N rate
|
>100dB
|
Damping factor
|
>350
|
Crosstalk
|
>70dB
|
Input sensitivity
|
0.775V/1.2V/2.2V/3.0V
|
Input impedance
|
20KΩ balance/10KΩunbalance
|
Voltage gain(8Ω)
|
42dB
|
Output circuitry
|
FTD
|
Cooling
|
2 fans, airflow from the front panel to rear panel; Variable wind speed, according to the temperature.
|
Product dimension(mm)
|
483mm×456mm×133mm
|
Packing dimension(mm)
|
610mm×575mm×170mm
|
G.W
|
32kg
|
Power
|
AC240V/50Hz-60Hz
|