BOSE PowerShare PS604A 230V EU

ติดต่อด่วน @soundscenter

Description : BOSE PowerShare PS604A

Adaptable Power Amplifier for Fixed Installs พาวเวอร์แอมป์ ให้กำลังไฟสูงสุดอยู่ที่ 600 วัตต์ ด้วยการรองรับทั้งอิมพีแดนซ์ทั้งสูงและต่ำได้ถึง 100 V PowerShare สามารถที่จะปรับการใช้งานได้หลากหลาย อีกทั้งยังสามารถส่งสัญญาณดิจิตอลได้สูงสุด 24 ช่องด้วยสายเคเบิล CAT 5 ดังนั้นแล้วจึงเป็นหนึ่งของพาวเวอร์แอมป์ที่มีประสิทธิภาพสูง

Bose PowerShare PS604A adaptable power amplifier delivers 600 watts for fixed-install applications. Through patented technology, total amplifier power is shared across all output channels, allowing installers the freedom to utilize power where needed. With support for both low- and high-impedance loads up to 100V, PowerShare amplifiers adapt to a wide range of applications. Onboard configurable loudspeaker processing and direct access to zone controllers eliminate the need for an additional signal processor in many installations, while outstanding audio performance and reliability are assured with patented technologies inherited from the field-proven PowerMatch® line. With the inclusion of AmpLink, up to 24 digital audio channels can be sent to the amp from a Bose DSP via a shielded CAT 5 cable. This unique set of features and technologies makes PowerShare one of the most versatile highperformance amplifiers available.

Features : BOSE PowerShare PS604A

• BOSE PowerShare PS604A PowerShare Technology – Patented PowerShare technology allows the total 600 watts of power to be shared asymmetrically across all outputs, as each output is capable of delivering full power. Instead of selecting amplifier power based on the needs of the largest zone, installers now have the freedom to use total amplifier power in the application. This enables more flexibility during the initial design, or later on-site when making unplanned changes that take advantage of surplus power.
• BOSE PowerShare PS604A Load-Independent Outputs – Each channel can be configured for lowimpedance (4-8 Ω) or high-impedance (70/100V) applications without bridging, use of jumpers, or software settings.
• BOSE PowerShare PS604A DFL™ System – The Dual Feedback Loop system, inherited from the fieldproven Bose PowerMatch® amplifier line, improves performance and reliability through continuous monitoring and control of both the current and voltage delivered to each output load. This combination provides improved linearity and lower distortion, while protecting loudspeakers.
• BOSE PowerShare PS604A Integrated Loudspeaker Processing with Optional PowerShare Editor Configuration – For applications requiring additional signal processing the PowerShare Editor Software offers real-time selection and control of Bose loudspeaker EQs, 9-band PEQs, matrix mixing, crossover, delay, and mute/output polarity through a USB connection. For basic setups without a PC, rear-panel settings allow installers to recall Bose loudspeaker equalization and protection per output channel. These features eliminate the need for an external signal processor in many applications.
• BOSE PowerShare PS604A AmpLink – Transports up to 24 uncompressed, near zero latency, digital audio channels between Bose DSPs and the PowerShare PS604A via shielded CAT 5 cable. The amp also supports a THRU path for daisychaining up to 8 other Bose AmpLink amplifiers, at a distance of up to 10 m between products. Any combination of AmpLink amplifiers can be daisychained.
  
  

Applications : BOSE PowerShare PS604A

• Performing arts venues
• Houses of worship
• Conference centers
• Retail stores
• Restaurants and bars
• Hospitality venues
  

Specifications : BOSE PowerShare PS604A

Power Rating

• BOSE PowerShare PS604A Amplifier Power : 4 x 150 W (THD+N < 0.04%, 1 kHz, 4-8 Ω, 70/100V)
• BOSE PowerShare PS604A Maximum Power per Channel : 600 W @ 4-8 Ω, 70/100V
• BOSE PowerShare PS604A Gain (Low-Z mode) : 32.0 dB
• BOSE PowerShare PS604A Gain (70V mode) : 35.0 dB
• BOSE PowerShare PS604A Gain (100V mode) : 38.0 dB

Audio Performance

• BOSE PowerShare PS604A Frequency Response : 4-8 Ω: 20 Hz – 20 kHz (+/- 0.5 dB @ 1 W); 70/100V: Same as 4-8 Ω with 50 Hz high-pass filter
• BOSE PowerShare PS604A Channel Separation (Crosstalk) : > 85 dB @ 1 kHz, > 65 dB @ 20 kHz
• BOSE PowerShare PS604A Signal to Noise Ratio : 100 dB (at rated power, A-weighted)