Features

• 2 Stereo Inputs
• 1 Mic Input
• 1 Line Input for Priority Audio
• 1 Stereo Output with Dedicated Subwoofer Output
• Quick and Simple Configuration via Front/Rear Panel Controls
• Digital Processor with Analog-Style Control
• Music EQ
• Global Mic EQ
• AutoWarmth™ and LevelGuard™
• Optional CSR Controllers
• Contact Closure Control
• Link Bus for Input Sharing
• Security Plate for Front Panel Lockout (included)

SPECIFICATIONS

Line Inputs:

• Type: 2 stereo, unbalanced RCA connectors
• Nominal Sensitivity: -10dBV
• Input Impedance: 20k ohms
• Maximum Input: +12dBu
• Equalization: Bass +/- 10dB @ 80Hz, Treble +/- 10dB @ 8kHz, 6dB/Octave Shelf

Mic Input:

• Type: Balanced, 5.08 mm, Euroblock connector
• Input Impedance: 2k ohms
• Noise: EIN <117 dB, 150 ohm, DSP band-limited 120Hz-8kHz, BW24
• Maximum Input: +20dBu
• Equalization: Bass +/-6dB @ 250Hz, Treble +/-6dB @ 2kHz, 6dB/Octave Shelf
• CMRR: >40dB, typically >55dB @ 1kHz
• Pre-Amp Gain: +30dB to +60dB adjustable
• Phantom Power: +48VDC, 10mA

Zone Output:

• Type: 1 stereo (Left, Right, Sub), balanced 3.5mm, Euroblock connector
• Output Impedance: 120 ohm balanced
• Max. Output Level: +20dBu
• XOVR specifications:

“Out”

• Left, Right: 20Hz-20kHz
• Sub: 20Hz-20kHz (mono summed)

“In”

• Left, Right: 125Hz High-Pass (BW24)
• Sub: 125Hz Low-Pass (BW24)
• Rear Panel LED Indicators:
• Source Inputs: Signal Present LED (turns on at -20dBu)
• Signal Clip LED (turns on at +10dBu)
• Mic Input: Signal Present LED (turns on at -20dBu)
• Signal Clip LED (turns on at +18dBu)

System Performance:

• Frequency Response: 20Hz – 20kHz, +/- 0.1dB
• Dynamic Range: 104dB, A-Weighted, 20Hz-20kHz
• Converter Type: Mic input implements dbx Type IV™ Conversion System
• Sample Rate: 48kHz
• Crosstalk: >75 dB
• THD+N: 0.005% typical at +4dBu, 20Hz-20kHz, 0dB gain

Miscellaneous:

• Direct Input: Balanced, 5.08mm Euroblock connector
• Input Impedance: 10k ohms
• Maximum Input: +20dBu
• Frequency response: 20Hz-20kHz
• Music Mute: 2-pin 5.08mm Euroblock connector
• Connecting the pins mutes all Source inputs, does not mute Mic input
• Page Assign: 2-pin 5.08mm Euroblock connector
• Connecting the pins will assign a page to the output zone
• Source Link: RJ45, CAT3 or higher. Max length 2.4m
• Main Link: RJ45, CAT3 or higher. Max length 2.4m

General:

• Power Consumption: 10W
• Power Requirements: 100-240V 
• Dimensions (WxHxD): 19.0” x 1.8”  x 7.0”
• Weight: 5.3 lbs (2.4kg)