JBL CONTROL23-1 ตู้ลำโพงพร้อมขา 3” Ultra-Compact Indoor/Outdoor Background/Foreground Speaker

ติดต่อด่วน @soundscenter

Description : JBL CONTROL23-1

The Control® 23-1 is a two-way 3” speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 23-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality compact indoor/outdoor foreground/background music (and/or paging) speaker is required.
 

 
FEATURES : JBL CONTROL23-1

• JBL CONTROL23-1 Components:  3” woofer with woven fiberglass cone  1/2” PEI diaphragm tweeter with fluid cooling
• JBL CONTROL23-1 Contemporary, high-design appearance
• JBL CONTROL23-1 Built-in InvisiBall® mounting hardware*, plus available U-bracket
• JBL CONTROL23-1 Weather resistant enclosure and transducers
• JBL CONTROL23-1 Wide 100° x 100° coverage 50 Watt power handling (100 Watt program) in direct 8Ω setting, plus built-in 15 Watt 70V/100V multi-tap transformer.
• JBL CONTROL23-1 High fidelity sound character with broad frequency response of 70 Hz – 20 kHz.

 
SPECIFICATIONS : JBL CONTROL23-1

• JBL CONTROL23-1 Frequency Range (-10 dB)     70 Hz to 20 kHz
• JBL CONTROL23-1 Frequency Response (+/-3 dB)     95 Hz - 19 kHz
• JBL CONTROL23-1 Power Rating     100W Continuous Program (2 hrs) 50 W (200W peak), Continuous Pink Noise (2 hrs) 40 W (160W peak) Continuous Pink Noise (100 hrs)
• JBL CONTROL23-1 Maximum Input Voltage     17.2 V RMS (2 hrs), 34.4 V peak
• JBL CONTROL23-1 Maximum SPL     103 dB ave. Continuous Pink Noise (109 dB peak)
• JBL CONTROL23-1 Sensitivity     86 dB, 1W/1m (ave. 100 Hz – 10 kHz)
• JBL CONTROL23-1 Coverage Angle     100° x 100°
• JBL CONTROL23-1 Directivity Factor (Q)     5.8 (averaged 1kHz – 16kHz)
• JBL CONTROL23-1 Directivity Index (DI)     7.2 dB (averaged 1kHz – 16kHz)
• JBL CONTROL23-1 Nominal Impedance     8 ohms (THRU setting)
• JBL CONTROL23-1 Crossover Type     2nd order low-pass, 2nd order high-pass
• JBL CONTROL23-1 Transformer Taps     70V: 15W, 7.5W, 3.7W, 1.8W 100V: 15W, 7.5W, 3.7W
• JBL CONTROL23-1 Insertion Loss <0.43 dB at any tap setting
• JBL CONTROL23-1 Thru Setting: 8Ω nominal
• JBL CONTROL23-1 Recommended Protective
• JBL CONTROL23-1 High-Pass     70 Hz high-pass (24 dB/oct) (for 8Ω operation and for all 70V/100V taps settings).
• JBL CONTROL23-1 Low Frequency Driver     76 mm (3.0 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp Kapton™ voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.
• JBL CONTROL23-1 High Frequency Driver     13 mm (0.5 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.
• JBL CONTROL23-1 Enclosure Material     High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
• JBL CONTROL23-1 Grille     Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-23WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.
• JBL CONTROL23-1 Installation     InvisiBall™ wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-23UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.
• JBL CONTROL23-1 Environmental     IP-44 per IEC529 (IP-55 when installed with the optional MTC-23WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-23WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.
• JBL CONTROL23-1 Termination     Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.
• JBL CONTROL23-1 Agency Rating     ROHS-compliant; Transformer UL Recognized per UL1876
• JBL CONTROL23-1 Colors     Black (RAL9004) or white (-WH, RAL9016)
• JBL CONTROL23-1 Dimensions (H x W x D)     200 x 141 x 111 mm (7.9 x 5.6 x 4.4 in); 141 mm (5.6 in) deep total when mounted on InvisiBall wall-mount bracket.
• JBL CONTROL23-1 Net Weight     1.8 kg (4.0 lbs)
• JBL CONTROL23-1 Shipping Weight     3.85kg (8.5 lbs) for the pair-pack (for 2 speakers) 12.0kg (26.5lbs) for the master-pack (for 6 speakers)
• JBL CONTROL23-1  Included Accessories     InvisiBall™ wall-mounting system), 4 mm x 80 mm hex key
• JBL CONTROL23-1  Optional Accessories     MTC-23UB-1 – Yolk-type U-bracket (&-WH) MTC-23WMG-1 – WeatherMax grille with backing (&-WH) MTC-23CM – Ceiling-Mount InvisiBall adapter (&-WH)