RODE NT1/AI1KIT Complete Studio Kit Microphone with Audio Interface

ติดต่อด่วน @soundscenter

Description : RODE NT1/AI1KIT 

ชุดไมโครโฟนสำหรับงานบันทึกเสียง RODE NT1/Ai1 Kit Complete Studio Kit with Audio Interface , ในชุดประกอบด้วย ไมโครโฟน RODE NT1 1 ตัว, USB Audio Interface RODE Ai-1 1 เครื่อง ชุด Shockmount RODE SMR 1 ชุด, สายไมโครโฟนแบบ Premium XLR Cable 1 เส้น และสาย USB 1 เส้น 

The Rode Complete Studio Kit combines the AI-1 USB audio interface with the NT1 cardioid condenser microphone, the SMR advanced shockmount with pop filter, a premium XLR cable, a USB cable, and a copy of Ableton Live Lite to create an all-in-one solution for recording vocals and instruments in a project studio

RODE NT1/AI1KIT : ในชุดประกอบด้วย

1.ไมโครโฟน RODE NT1 Cardioid Condenser Microphone

The RODE NT1 Cardioid Condenser Microphone from RODE is a large-diaphragm cardioid condenser microphone that features RODE’s HF6 1″ capsule. The HF6 is designed to provide a detailed midrange response with smooth highs and warm bass. The capsule itself is seated in a Rycote Lyre internal shockmount to help reduce vibration and handling noises.

The microphone’s electronics were designed from the ground-up for quiet performance, and allow the NT1 to have a low, 4.5 dB of self-noise. The body of the mic is machined from nickel-plated aluminum that is then coated in a ceramic layer that is electrostatically applied for a scratch-resistant finish. The NT1 includes the RM2 mic clip and has a 1-year limited warranty that extends to 10-years after registration with RODE.

2.SMR Advanced Shock Mount for Large Diaphragm Condenser Mics

The Rode SMR is a professional-grade shock mount for large diaphragm condenser mics. Featuring a double-Lyre suspension system, the SMR enhances Rycote’s Lyre system by using a smaller inner Lyre to act as a tensioning element.

The SMR’s removable all-metal pop filter provides an integrated solution for plosive protection, that is washable and designed to last as long as the shock mount and microphone. The SMR’s clamping system design utilizes a large surface area, allowing for ample friction and weight handling, without the need for over-tightening of the locking thread. With the load distributed over a greater surface area, the clamping system is designed to better withstand the wear and tear of repeated use.

The SMR’s frame is made from an engineering grade reinforced polymer. Vibration force is evenly distributed around the outer frame via the wide mounting rails, increasing the effectiveness of the Lyre system.  A base nut is also included, suitable for all compatible Rode microphones.

3.ออดิโออินเตอร์เฟส AI-1 Studio-Quality USB Audio Interface

The Rode AI-1 is a studio-quality audio interface well suited for recording vocals, instruments, and voice-overs into your Mac or Windows computer. The interface features a single, combo XLR-1/4″ input with phantom power, two balanced 1/4″ monitor outputs, and a single, discrete, studio-quality headphone output and level control. The device can operate in zero-latency monitoring mode, which connects the preamp directly to the headphone output for delay-free performance while recording. With the headphone input engaged, the two monitor outputs are bypassed. To engage the monitor outputs, simply remove the headphone plug from the jack.

The rugged aluminum body is finished with a satin black finish and features large rubber feet, which prevents the desktop interface from sliding about when engaged. The class compliant AI-1 requires no drivers and features a USB-C connector, which not only connect to your computer, but also provides powers as well. The Rode AI-1 ships with a USB cable and a license for Ableton Live Lite.

Specifications : RODE NT1/AI1KIT 

RODE NT1/AI1KIT : AI-1 Studio-Quality USB Audio Interface

• RODE NT1/AI1KIT Analog Inputs and Outputs Input: 1 x Neutrik XLR-1/4″ / 6.35 mm combo
• RODE NT1/AI1KIT Outputs: 2 x 1/4″ / 6.35 mm (impedance balanced), 1 x 1/4″ / 6.35 mm (headphones)
• RODE NT1/AI1KIT Computer Connectivity USB Type-C
• RODE NT1/AI1KIT Form Factor Desktop
• RODE NT1/AI1KIT Mic Preamps 1
• RODE NT1/AI1KIT Phantom Power Yes
• RODE NT1/AI1KIT Bit Depth 24-bit
• RODE NT1/AI1KIT Sample Rates 44.1, 48, 88.2, 96 kHz
• RODE NT1/AI1KIT Zero-Latency Direct Monitoring Yes
• RODE NT1/AI1KIT USB Bus Powered Yes
• RODE NT1/AI1KIT OS Requirements Mac OS X 10.10 or later
• RODE NT1/AI1KIT Windows 7 or later
• RODE NT1/AI1KIT Dynamic Range 104 dBu
• RODE NT1/AI1KIT Equivalent Noise Equivalent Input Noise at Maximum Gain: -128 dBA (source impedance 150 ohms, 20 Hz to 20 kHz, A-weighted)
• RODE NT1/AI1KIT Frequency Response 20 Hz to 20 kHz (better than ±1 dB, measured after ADC)
• RODE NT1/AI1KIT Gain Range 0 to 45 dB
• RODE NT1/AI1KIT Input Impedance XLR Mic Input: 1.3 kOhms
• RODE NT1/AI1KIT Instrument Input: 0.9 MOhms
• RODE NT1/AI1KIT Monitor Outputs Max Output Level: -6 dBu
• RODE NT1/AI1KIT Headphone Output Max Output Power (at 1% THD):
• RODE NT1/AI1KIT 32 Ohms, 24 mW,
• RODE NT1/AI1KIT 300 Ohms, 245 mW
• RODE NT1/AI1KIT Dimensions (D x W x H) 3.9 x 4.9 x 1.5″ / 100.0 x 124.0 x 38.0 mm
• RODE NT1/AI1KIT Weight 19.8 oz / 561.3 g

RODE NT1/AI1KIT : NT1 Cardioid Condenser Microphone (Microphone Only)

• RODE NT1/AI1KIT Analog Performance
• RODE NT1/AI1KIT Operating Principle Pressure Gradient
• RODE NT1/AI1KIT Transducer Condenser
• RODE NT1/AI1KIT Diaphragm 1″ / 25.40 mm
• RODE NT1/AI1KIT Polar Pattern Cardioid
• RODE NT1/AI1KIT Frequency Range 20 Hz to 20 kHz
• RODE NT1/AI1KIT Equivalent Noise Level 4 dB A-Weighted
• RODE NT1/AI1KIT Maximum SPL 132 dB SPL
• RODE NT1/AI1KIT THD 1%
• RODE NT1/AI1KIT Impedance 100 Ohms
• RODE NT1/AI1KIT Sensitivity -29 dB

RODE NT1/AI1KIT : General

• Output Connectors 1 x 3-Pin XLR
• Operating Voltage 24 V
• 48 V
• Length 7.36″ / 187 mm
• Diameter 1.97″ / 50 mm
• Weight 0.97 lbs / 440 g

RODE NT1/AI1KIT : Packaging Info

• Box Dimensions (LxWxH) 9.1 x 5.5 x 3.4″

RODE NT1/AI1KIT : SMR Advanced Shock Mount for Large Diaphragm Condenser Mics

• Dimensions 5.0 x 9.0 x 8.3″ (130 x 220 x 210 mm)
• Weight 9.2 oz (260 g)

RODE NT1/AI1KIT : Packaging Info

• Box Dimensions (LxWxH) 10.158 x 7.795 x 4.803″