RODE VideoMic Pro Rycote
Compact Directional On-camera Microphone
ติดต่อด่วน @soundscenter
Description : RODE VideoMic Pro Rycote
The RØDE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.
At the heart of the VideoMic Pro is an all-new 1/2" condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels) with an incredibly low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.
The integrated Rycote® Lyre® based shock mounting system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera's preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera's comparatively low quality audio circuitry.
The microphone uses a standard sized shoe mount for on camera use, and features a 3/8" thread in the base of the mount for easy boom pole mounting.
The VideoMic pro is battery powered, and provides over 70 hours recording from a single 9V battery.
The RØDE VideoMic is designed and made in Australia, and covered by RØDE Microphones' industry leading 10 year warranty.
Want to learn more about the microphones in the VideoMic range? Explore now and find your perfect VideoMic here.
Features : RODE VideoMic Pro Rycote
- RODE VideoMic Pro Rycote Rycote® Lyre® shock mounting onboard
- RODE VideoMic Pro Rycote All-new capsule with lower noise and higher sensitivity
- RODE VideoMic Pro Rycote Broadcast recording quality condenser microphone
- RODE VideoMic Pro Rycote Compact form factor (150mm/6” length)
- RODE VideoMic Pro Rycote Ultra lightweight (85g/3oz)
- RODE VideoMic Pro Rycote 9V battery powered - over 70 hours use (alkaline)
- RODE VideoMic Pro Rycote Integrated shock mounting
- RODE VideoMic Pro Rycote Integrated foam windscreen
- RODE VideoMic Pro Rycote 3.5mm stereo mini-jack output (dual mono)
- RODE VideoMic Pro Rycote Two step High Pass Filter (flat, 80Hz)
- RODE VideoMic Pro Rycote Three position level control (-10dB, 0, +20dB)
- RODE VideoMic Pro Rycote Camera shoe mount with 3/8” thread for easy boompole mounting
- RODE VideoMic Pro Rycote 10 year extended warranty when you register your microphone
SPECIFICATIONS : RODE VideoMic Pro Rycote
- RODE VideoMic Pro Rycote Acoustic Principle Line Gradient
- RODE VideoMic Pro Rycote Active Electronics JFET impedance converter
- RODE VideoMic Pro Rycote Capsule 0.50"
- RODE VideoMic Pro Rycote Address Type End
- RODE VideoMic Pro Rycote Frequency Range 40Hz - 20kHz (selected HPF @80)
- RODE VideoMic Pro Rycote Output Impedance 200Ω
- RODE VideoMic Pro Rycote Maximum SPL 134dBSPL
- RODE VideoMic Pro Rycote Maximum Output Level 6.9mV (@ 1kHz, 1% THD into 1KΩ load)
- RODE VideoMic Pro Rycote Sensitivity -32.0dB re 1 Volt/Pascal (20.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- RODE VideoMic Pro Rycote Equivalent Noise Level (A-weighted) 14dBA
- RODE VideoMic Pro Rycote Weight 85g
- RODE VideoMic Pro Rycote Dimensions 100mmH x 75mmW x 170mmD
- RODE VideoMic Pro Rycote Warranty 1 year with free extension to 10 years following registration here
