Turbosound NuQ152-AN 2500 Watt 2 Way 15" Full Range Powered Loudspeaker with KLARK TEKNIK DSP Technology and ULTRANET Networking
ติดต่อด่วน @soundscenter
Description : Turbosound NuQ152-AN
The 2 way full range NuQ152-AN is a 2,500 Watt 15" powered loudspeaker system that is ideally suited for a wide range of portable and fixed installation speech and music sound reinforcement applications. Designed to work individually without a controller, the NuQ152-AN provides optimal performance for FOH, sidefill and delay line loudspeakers, and is an exceptional choice for wedge monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications.
The NuQ152-AN loudspeaker features a carbon fibre loaded 15" low frequency driver with a low mass voice coil for improved transient response and an aluminium dome 1" neodymium high frequency compression driver, which is mounted on a 70° horizontal by 70° vertical dispersion low distortion waveguide.
Output power for the NuQ152-AN is provided by means of an efficient and lightweight Klark Teknik 2,500-Watt Class-D power amplifier. A sophisticated, but easy to use Klark Teknik Digital Signal Processor (DSP) provides dynamic EQ for impressive full range response at low volume levels and transparent limiting for clarity at high output levels – and for long-term reliability.
On the rear panel of the amplifier module, the user interface’s LCD display and single rotary encoder provide intuitive access to: position compensation, user EQ control, subwoofer integration and signal routing features. In addition to the balanced XLR input, an XLR output is provided for daisy-chaining more active loudspeakers or for use with active subwoofers. An onboard USB port provides access for remote control of the NuQ152-AN via PC computer, as well as DSP firmware updates.
ULTRANET connectivity is provided by two locking etherCON* connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single CAT5 cable between compatible digital devices – including mixers, I/O stage boxes, powered loudspeakers and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation.
Finished in a highly durable semi matte black paint, the trapezoidal cabinet is constructed from 15 mm (5⁄8") birch plywood – and includes a rugged powder coated perforated steel mesh grille. Multiple threaded rigging points are provided for suspension in any orientation. The NuQ152-FY flying yoke kit provides added flexibility in permanent install applications (available separately). The NuQ152-AN also features a 35 mm socket for standard pole mounting – plus integrated handles for convenient transport. Mains power input is provided via a Neutrik powerCON* connector.
Architecture & Engineering Specifications
The loudspeaker shall be of the full range, two-way, powered type, consisting of one 15" (394 mm) LF driver and one 1" (25 mm) HF compression driver. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 55 Hz to 18 kHz and within -10 dB from 50 Hz to 20 kHz. Nominal dispersion, at -6 dB points, shall average 70° H x 70° V. Maximum amplifier output power shall be 2,500 Watts peak, independent of limiters and driver protection circuits. Maximum SPL (peak), measured at 1 metre with music program, shall be 133 dB. Dimensions: 712 mm high x 430 mm wide x 385 mm deep (28" x 16.9" x 15.2"). Net weight: 23.6 kg (52.0 lbs). The loudspeaker system shall be the Turbosound NuQ152-AN. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.
Features : Turbosound NuQ152-AN
- Turbosound NuQ152-AN 2 way full range powered loudspeaker for portable PA and installation applications
- Turbosound NuQ152-AN 2,500 Watt power featuring Klark Teknik Class-D technology
- Turbosound NuQ152-AN Klark Teknik Digital Signal Processing for total system control
- Turbosound NuQ152-AN ULTRANET digital audio networking connects to mixers and other sources
- Turbosound NuQ152-AN Carbon fibre loaded 15" low frequency driver with inside/outside coil
- Turbosound NuQ152-AN Aluminium dome 1" neodymium motor compression driver
- Turbosound NuQ152-AN Low distortion waveguide provides 70? H x 70? V dispersion
- Turbosound NuQ152-AN Fully featured user interface with LCD display for ease of navigation
- Turbosound NuQ152-AN PC remote control software downloadable at turbosound.com
- Turbosound NuQ152-AN 15 mm (5/8") birch plywood enclosure with hard wearing semi matt black paint finish
- Turbosound NuQ152-AN Rugged powder coated perforated steel mesh grille
- Turbosound NuQ152-AN Integral 35 mm pole mount and handles
- Turbosound NuQ152-AN Multiple internal rigging points allow bracket mount and suspension in any orientation
- Turbosound NuQ152-AN Mains input on Neutrik powerCON* connector
- Turbosound NuQ152-AN 10-Year Warranty Program*
- Turbosound NuQ152-AN Designed and engineered in the U.K.
Specification : Turbosound NuQ152-AN
System : Turbosound NuQ152-AN
- Turbosound NuQ152-AN Frequency Response 55 Hz – 18 kHz ±3 dB 50 Hz – 20 kHz -10 dB
- Turbosound NuQ152-AN Nominal Dispersion 70° H x 70° V @ -6 dB points
- Turbosound NuQ152-AN Maximum SPL 133 dB peak
- Turbosound NuQ152-AN Crossover Type Active
- Turbosound NuQ152-AN Transducers 1 x 15" (393.5 mm) LF driver 1 x 1" (25.4 mm) HF compression driver
- Turbosound NuQ152-AN Limiter Independent HF, LF, peak and rms
Amplifier
- Maximum Output Power* 2,500 W
- Type Class-D
- Protection Short circuit, thermal
Connectors
- Input/link 1 x Combo Jack/XLR 1 x XLR
- Ultranet input/link 2 x RJ45
- Mains Supply Neutrik powerCON 20A†
Controls
- DSP Rotary push-encoder and level control
- Buttons for Process, Setup, Exit, Enter
- User DSP Functions
- Factory EQ Presets Positioning, Sound mode, FBQ
- Display LCD 128 x 32, blue, backlit
- Delay 0 - 300 ms
- Equalisation High and low shelving EQ 2 x parametric EQ
- Limiter Zero attack input limiter
- Presets 20 total presets, 19 user-definable
- Crossover High Pass L-R 24 dB/oct
- Protection Lock-out function for all settings
Ultranet Digital Network
- Digital processing
- System
- Cabling
Power Supply
- Power consumption 90 W @ 1/8 max power
- Voltage (fuses)
Enclosure : Turbosound NuQ152-AN
- Turbosound NuQ152-AN Dimensions HWD 712 x 430 x 385 mm (28.0 x 16.9 x 15.2")
- Turbosound NuQ152-AN Net weight 23.6 kg (52.0 lbs)
- Turbosound NuQ152-AN Construction 15 mm (5/8") birch plywood
- Turbosound NuQ152-AN Finish Semi matt black paint
- Turbosound NuQ152-AN Grille Powder coated perforated steel
- Turbosound NuQ152-AN Flying hardware M10 x 8 points
Accessories
- NUQ152-FY flying yoke for NuQ152
