LAB GRUPPEN FP 9000

ติดต่อสอบถาม

Specifications FP 9000

General

Number of channels 2

Peak total output both channels driven 9000 W

Peak output voltage per channel 170 V

Max. output current per channel 70 A peak

Max. Output Power 2 ohms 4 ohms 8 ohms 16 ohms

Per ch. (both ch.’s driven) 4500 W 3000 W 1600 W 800 W

Bridged per ch. n.r. 3) 9000 W 6000 W 3200 W

Performance with Gain: 35 dB and VPL: 170 V

THD 20 Hz - 20 kHz for 1 W <0.1%

THD at 1 kHz and 1 dB below clipping <0.05%

Signal To Noise Ratio >112 dBA

Channel separation (Crosstalk) at 1 kHz >70 dB

Frequency response (1 W into 8 ohms) +0/-3 dB 2 Hz - 34.2 kHz

Input impedance 20 kOhm

Input Common Mode Rejection, CMR 50 dB

Output impedance @ 100 Hz 56 mOhm

Voltage Peak Limiter (VPL), max. peak output 

VPL, selectable per ch. 170, 140, 116, 100, 80, 66, 54 V

VPL, selectable when bridged 1) 340, 280, 232, 200, 160, 132, 108 V

Voltage Peak Limiter mode (per ch.) Hard / Soft

Gain and Level

Amplifier gain selectable (all channels) 1) 

– rear-panel switches

23, 26, 29, 32, 35, 38, 41, 44 dB

Default gain 38 dB

Level adjustment (per ch.) Front-panel potentiometer, 31 position detented from -inf to 0 dB

Connectors and Switches

Input connectors (per ch.) 3-pin XLR, electronically balanced

Output connectors (per ch.) Binding Posts 2-pole

Output bridge mode A+B - Ch. A is signal input source

NomadLink® network On board, 2 x RJ45 EtherCon connectors, IN and OUT

Intelligent fans (on/off) Yes, depending on presence of output signal

Power on/off and Remote enable on/off Individual switches on front-panel

Cooling Two fans, front-to-rear airflow, temperature controlled speed

Front-panel indicators:

Common NomadLink Network; Power Average Limiter (PAL) 2); Power on 

Per channel Signal present / High-impedance; -20 dB, -15 dB, -10 dB and -4 dB output signal; 

Voltage Peak Limiter (VPL); Current Peak Limiter (CPL); Very High Frequency (VHF); High temperature; Fault; Mute

Power

Operating voltage, 230 V / 115 V nominal 4) 130-265 V / 65-135 V

Minimum power-up voltage, 230 V / 115 V 171 V / 85 V

Power Average Limiter (PAL) 2) Yes

Soft start / Inrush Current Draw Yes / max. 5 A

Mains connector 230 V CE: 16 A, CEE7; 115 V ETL: 30 A Twist lock

Dimensions (W/H/D) W: 483 mm (19”), H: 88 mm (2 U), Overall D: 396 mm (15.6”), Mounting D: 358 mm (14.1”) 

Weight 12 kg (26.4 lbs.)

Finish Black painted steel chassis with gray painted steel front

Approvals CE, ANSI/UL 60065 (ETL), CSA C22.2 NO. 60065, FCC