ไมโครโฟน audio-Technica ES935C6-Cardioid Microphone 

• Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
• Low-profile element provides uniform cardioid polar pattern with 120º acceptance angle
• Unobtrusive design with an overall length of only 7.77" (197.3 mm)
• Plugs into any standard XLRF-type connector, or direct mounts to 5/8"-27 stands using included thread-mount adapter
• Included shock mount attenuates noise, shock and vibration transmitted through the mounting surface
• Available interchangeable elements permit angle of acceptance from 90º to 360º
• Small-diameter gooseneck permits highly flexible positioning while maintaining smooth, contoured appearance
• Superior off-axis rejection for maximum gain before feedback
• Requires 11V to 52V DC phantom power
• UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
• Integral UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
• RoHS compliant—free from all substances specified in the EU directive on hazardous substances

• ELEMENT	Fixed-charge back plate, permanently polarized condenser
  POLAR PATTERN	Cardioid
  FREQUENCY RESPONSE	30-20,000 Hz
  LOW FREQUENCY ROLL-OFF	80 Hz, 18 dB/octave
  OPEN CIRCUIT SENSITIVITY	-40 dB (10.0 mV) re 1V at 1 Pa
  IMPEDANCE	250 ohms
  MAXIMUM INPUT SOUND LEVEL	138 dB SPL, 1 kHz at 1% T.H.D.
  DYNAMIC RANGE (typical)	109 dB, 1 kHz at Max SPL
  SIGNAL-TO-NOISE RATIO	65 dB, 1 kHz at 1 Pa
  PHANTOM POWER REQUIREMENTS	11-52V DC, 4 mA typical
  SWITCH	Flat, roll-off
  WEIGHT	104 g (3.7 oz)
  DIMENSIONS	197.3 mm (7.77") long,  8.4 mm (0.33") head diameter,  18.9 mm (0.74") base diameter
  OUTPUT CONNECTOR	Integral 3-pin XLRM-type
  OPTIONAL INTERCHANGEABLE ELEMENTS	ESE-O omnidirectional (360°)  ESE-H hypercardioid (100°)  ESE-ML MicroLine® (90°)
  ACCESSORIES FURNISHED	AT8109 two-stage foam windscreen; AT8474 universal isolation mount; AT8473 quick-mount stand adapter; 5/8”-27 to 3/8”-16 threaded adapter
  AUDIO-TECHNICA CASE STYLE	M26