|
SPECIFICATIONS
|
SR-8200 |
Frequency Range 1
(-10 dB, half space) |
52 Hz to 20 kHz |
| Rated Coverage Angle |
90° axisymmetric |
| |
|
Maximum Rated SPL 4
Calculated Peak at rated power
Calculated Continuous |
123 dB
117 dB |
| Rated Impedance |
8 ohms |
Rated Noise Power 2
Recommended Amplifier Power |
200 watts
400 watts into 8 ohms |
| Sensitivity 2.83 V at 1 m, free-field 3 |
94 dB |
| Crossover Frequency |
2.6 kHz |
| Recommended Processing |
Subsonic filter at 50 Hz as provided by QSC DCA amplifiers |
| Connectors |
Barrier strip screw terminals accept up to #10 AWG stranded wire |
| Transducers |
8" long throw low frequency transducer
1" titanium diaphragm compression driver on an axisymmetric horn |
| Enclosure |
MDF, baffle angle is 15° downward |
| Dimensions (HWD) inches |
19.5 × 14.3 × 9.6 |
| Dimensions (HWD) mm |
495 x 363 x 244 |
| Weight |
24.6 lb (11.1 kg) |
1 Free-field, -10 dB from on-axis sensitivity
2 IEC60268-1 noise signal for 2 hours
3 On-axis, free-field sensitivity, 2.83V at 1 m
4 Calculated from rated noise voltage and sensitivity
Specifications are subject to change without notice.