Turbosound iQ10 2500 Watt 2 Way 10" Powered Loudspeaker with KLARK TEKNIK DSP Technology, SULTRANET Networking
ติดต่อด่วน @soundscenter
Description : Turbosound iQ10
The 2,500-Watt iQ10 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes an 10" low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction.
Equipped with a very efficient and lightweight two channel Klark Teknik Class-D power amplifier, the iQ10 provides an impressive 2,500 Watts of output power. A high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to use Klark Teknik Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels – and long-term reliability. iQ10’s advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry’s most-respected loudspeakers.
Klark Teknik also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to easily optimise the iQ10’s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors.
On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, the Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ10 features a mic/line switch and level control with signal present LED on each channel.
The iQ10 also features our proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk so common to analogue methods, but also significantly reduces the setup or installation time required. An onboard USB port provides access for remote control of the iQ10 via PC computer, as well as DSP and speaker modelling firmware updates.
The lightweight fibre glass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille and multiple internal rigging points for permanent installations. The iQ10 is also fitted with a dual angle pole mount socket, allowing the enclosure to be pole mounted straight on, or raised and angled downwards for optimal audience coverage. Mains power input and link output is provided via Neutrik powerCON* connectors.
Features : Turbosound iQ10
- Turbosound iQ10 2 way full range loudspeaker for portable PA and installation applications
- Turbosound iQ10 2,500 Watt power featuring Klark Teknik Class-D technology
- Turbosound iQ10 Klark Teknik Digital Signal Processing for total system control
- Turbosound iQ10 Speaker modelling includes accurate models of industry standard speakers
- Turbosound iQ10 SCC (Spatial Contour Control) compensates frequency response in relation to physical speaker placement
- Turbosound iQ10 ULTRANET digital audio networking connects to mixers and other sources
- Turbosound iQ10 10" low frequency driver with low mass voice coil for improved transient response
- Turbosound iQ10 High temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction
- Turbosound iQ10 Fully featured user interface with LCD display for ease of navigation
- Turbosound iQ10 PC remote control software downloadable at turbosound.com
- Turbosound iQ10 Lightweight fibre glass reinforced composite enclosure
- Turbosound iQ10 Rugged powder coated perforated steel mesh grille
- Turbosound iQ10 Dual angle pole mount for accurate audience coverage
- Turbosound iQ10 Multiple internal rigging points for installation applications
- Turbosound iQ10 Mains input and link output on Neutrik powerCON* connectors
- Turbosound iQ10 10-Year Warranty Program*
- Turbosound iQ10 Designed and engineered in the U.K.
Specification : Turbosound iQ10
System : Turbosound iQ10
- Turbosound iQ10 Frequency response 55 Hz – 18 kHz ±3 dB 50 Hz – 20 kHz -10 dB
- Turbosound iQ10 Nominal dispersion 90° H x 60° V @ -6 dB points
- Turbosound iQ10 Maximum SPL 129 dB peak
- Turbosound iQ10 Crossover type Active
- Turbosound iQ10 Transducers 1 x 10" (256 mm) LF driver 1 x 1" (25.4 mm) HF compression driver
- Turbosound iQ10 Limiter Independent HF, LF, peak and rms
Amplifier
- Maximum output power* 2,500 W
- Type Class-D
- Protection Short circuit, open circuit, thermal
Connectors
- Input A / B 2 x combo jack/XLR
- Sensitivity Line +4 dBu, mic -22 dBu, switchable
- Input impedance 20 kO unbalanced, 40 kO balanced
- Maximum input level +21 dBu
- Output A / B 2 x XLR Linked to input
- Mix output XLR, balanced
- Output impedance 100 O unbalanced, 200 O balanced
- Ultranet input/link 2 x RJ45
- Mains Supply Neutrik powerCON input 20A and link 15A
Controls
- DSP Rotary push-encoder
- Buttons for PROCESS, SETUP, EXIT, ENTER
- Mixer section 2 x gain controls (channels A and B) 2 x Line/Mic switch
User DSP Functions
- Factory EQ presets Positioning, Sound mode
- Sound modeling, FBQ
- Display LCD 128 x 32, blue backlit
- Delay 0 - 300 ms
- Equalisation High and low shelving EQ 2 x parametric EQ
- Limiter Zero attack input limiter
- Presets 20 total presets, 19 user-definablenable
- Crossover High Pass L-R 24 dB/oct
- Protection Lock-out function for all settings
Ultranet Digital Network
Power Supply
- Power consumption 150 W @ 1/8 max power
- Voltage (fuses)
Enclosure : Turbosound iQ10
- Turbosound iQ10 Dimensions HWD 526 x 324 x 316 mm(20.7 x 12.7 x 12.4")
- Turbosound iQ10 Net weight 17.2 kg (38 lbs)
- Turbosound iQ10 Construction Injection-moulded polypropylene enclosure
- Turbosound iQ10 Finish Black painted
- Turbosound iQ10 Grille Powder coated perforated steel
- Turbosound iQ10 Flying hardware M10 x 3 points
Accessories
- IQ10-WB Steel wall bracket
