TANNOY VNET15DR Subwoofer Line Array Speaker ลำโพงซับวูฟเฟอร์แบบแขวนไลน์อาร์เรย์
The VNET 15DR is a powered, network enabled version of the VS 15DR, designed to satisfy a specific requirement for applications where an installed VQNet system needs to deliver more low-frequency response than is possible with simply the 2 x 12” LF element of a full range VQ Series enclosure on its own, or by using VQ MB devices within a modular system. Examples of such applications would be nightclub dancefloors, corporate AV applications, performance art theatres or auditoria where the clarity and headroom of a VQ system may be desired without needing to be driven to such an extent that large scale subwoofers would be required.
The VNET 15DR is part of an expanding line up of VQ Series products, addressing the
requirement for compact dimensions without compromising performance in any way.
A single direct radiating 15” low frequency transducer offers high power handling capability and extended low frequency response (down to 50Hz) from this given form factor. With high efficiency (100dB 1W@1m) and with a sustained output of 130dB, the VNET 15DR shares the same modular enclosure format as the other VQ Series modules including the VQNET MH, allowing the systems designer to create tightly packed arrays or clusters including the use of multiple bass devices for improved vertical pattern control at low frequencies.
The modular approach of amplifiers, processing, monitoring and drivers designed into each VNET 15DR enables acoustic optimization for the subwoofer to perform as a unified whole. The intuitive VNET™ software, integrated processing, tuning control, performance diagnostics and protection produces an easy to deploy, exceptionally high performance networkable subwoofer.
Features :
- Designed to extend the low frequency response of VQ full range systems
- Alleviates the need for large format ground-stacked subwoofer enclosures in many instances
- Integral high power amplification (1200W output)
- Onboard DSP
- VNET™ implementation – real-time diagnostic control
- Modular enclosure for integration with other VQ Series devices to form compact full-range systems or larger scale flown arrays
- High sensitivity, therefore high SPL’s can be achieved with modest power consumption
Applications :
- Auditoria / Lecture Theatres
- Bars & Restaurants
- Conference rooms
- Corporate AV
- Fitness Centres & Leisure Facilities
- Houses Of Worship
- Live Music / Performance Venues
- Night Club
- Performing Arts Spaces
- Portable PA
- Retail Spaces & Malls
- Sports Arenas / Stadia
- Theme Parks
Specifications :
| PERFORMANCE |
| System Type |
Bass loudspeaker - Direct radiator |
| Frequency Response ( /-3dB) 1 |
50Hz - 3.5kHz |
| Frequency Range (-10dB) 1 |
38Hz - 4.5kHz |
| Rated Maximum SPL 2 |
130dB (average) |
| |
136dB (peak) |
| Driver Complement |
380mm (15”) Bass driver |
| Crossover (DSP Generated) |
Variable low pass filter |
| Distortion |
|
| 10% Full Power (28.3V) |
2nd Harmonic 3rd Harmonic |
| 40Hz |
1.42% 1.83% |
| 100Hz |
0.40% 0.33% |
| 1% Full Power (8.94V) |
2nd Harmonic 3rd Harmonic |
| 40Hz |
0.68% 2.20% |
| 100Hz |
0.09% 0.32% |
| |
|
| Notes |
1. Average over stated bandwidth. Measured at 1 metre
on axis. |
| |
2. Unweighted pink noise input, measured at 1 metre
in half space |
| |
A full range of measurements, performance data,
and Ease™ Data can be downloaded from www.tannoy.com |
| |
Tannoy operates a policy of continuous research
and development. The introduction of new materials
or manufacturing methods will always equal or exceed
the published specifications, which Tannoy reserves
the right to alter without prior |
| Construction |
|
| Enclosure |
89.9 litres, 18mm (5/8”) birch plywood internally
braced. |
| Finish |
Textured black or white paint |
| |
Powder coated steel grille |
| Connectors |
1 x female XLR (input) |
| |
1 x male XLR (link) |
| |
1 x RJ45 (network in) |
| |
1x RJ45 (network link) |
| |
1 x Neutrik Powercon |
| Controls & Indicators |
LED on front of cabinet behind grill. |
| |
Power LED (Blue) |
| |
Signal LED (Green) |
| |
Limit LED (Red) |
| |
User DSP - defeat switch |
| |
Power Switch |
| Fittings |
2 x Recessed carrying handles |
| |
12 x M10 flying inserts. |
| |
4 x Rubber feet |
| Dimensions |
510mm(H) x 694mm(W) x 515mm(D) |
| |
20.08“(H) x 27.32 ”(W) x 20.28”(D) |
| Weight |
33kg (72.7lbs) net |
| |
40kg (88.1lbs) shipping |
| Electronics |
|
| Efficiency |
>85% typically |
| Damping Factor |
120 ref 8W |
| Distortion |
<0.05% @ 1kHz -3dB output (22kHz bandwidth) |
| Input Impedance |
5.6kWunbalanced, 11.2kW balanced |
| Output Power (Programme) |
1200W |
| Input Sensitivity |
1.4V ( 5.5dBu) |
| System Type |
Dual channel Class D (Bridged) |
| |
|
| DSP system |
|
| Comms Facilities |
Firmware updatable and selected parameters editable |
| Communications |
Serial - RS485 Proprietary message format |
| Dynamic Range |
112dB(A) typical |
| DSP |
3rd generation SHARC |
| Sampling Frequency |
96kHz 24 bit A/D-D/A word length |
| Format |
1 IN - 1 OUT |
| |
|
| PSU Specifications |
|
| Input Connector |
Locking Neutrik Powercon |
| Voltage Selection |
Automatic (115 / 230V, 45 - 65Hz) |
| Type |
High current, high freq. switch-mode |
| Efficiency |
>90% typical |
| Input voltage |
100v / 115v / 230v nominal /-10% |
| Mains fuse |
External |
| Fuse type |
T10AT |
| Other features |
Automatic soft-start
|
