
TANNOY i7-BK Column Speaker ลำโพงคอลัมน์ ขนาด 4x4 นิ้ว, 360 วัตต์ ไลน์โวลล์ สำหรับงานประกาศ ( Sound Column Loudspeake )
The i7 is a tall and slim loudspeaker device equipped with four 100mm (4”) low frequency direct radiating drive units and one 25mm (1.00”) titanium dome tweeter arranged as a line source.
Designed for use in acoustically difficult applications where controlled coverage is required, the dispersion characteristics of the i7 direct sound into the desired space while minimizing reflections from the ceiling. This makes it ideal for high quality music and speech reinforcement in highly reverberant environments ranging from houses of worship to retail environments and airports to conventions centres.
Available in either a charcoal or white painted finish, the shallow cabinet profile ensures discreet installations close to a wall or ceiling without sacrificing vertical coverage.
The coupling effects in the vertical plane result in a narrow and controlled 70° coverage pattern while the horizontal coverage is an extremely wide 110°. The complex frequency shading and integration techniques employed in the internal passive crossover network result in a smooth and uniform frequency response from 100 Hz to 20 kHz.
A selector switch is located on the rear termination panel to allow the i7 to be installed as either a low impedance (8 Ohm) or 100 V / 70.7 V distributed line system. A rotary control adjusts the integral low insertion loss 60 W transformer for 60, 30, 15, 7.5 W operation.
Features :
- Slim line profile, allowing discreet installation
- Switchable 70 Volt / 100 Volt or 8 Ohms
- Multi tap voltage and wattage
- THP 60 line transformer providing low insertion loss resulting in a more dynamic performance with extended bandwidth
- Wide controlled dispersion (110 degrees x 50 degrees )
- Multiple angle bracket (i7 MAB) and i7 yoke
Applications :
- Auditoria / Lecture Theatres
- Ballrooms and convention Centres
- Bars & Restaurants
- Concourses
- Houses Of Worship
- Museums & Galleries
- Transport Hubs
Specifications :
PERFORMANCE |
System type |
Column source loudspeaker |
Recommended Amplifier Power |
Up to 180W / 8 Ohms |
Power Handling (2) |
Average: 90W
Programme: 180W
Peak: 360W |
Sensitivity 2.83 Volts @ 1 metre (3) |
Anechoic: 89dB
Half Space: 92dB |
Maximum SPL |
\r\n
Average: 108dB
Average: 106.5dB (60W tapping on transformer)
Peak: 114dB
|
Wattage Tap Selections |
60, 30, 15, 7.5 Watts |
Switchable Transformer Options |
70 Volt / 100 Volt or 8 Ohms |
Impedance |
8 Ohms |
CROSSOVER |
Frequency |
1.8 kHz, 2.5 kHz |
Type |
Passive |
DRIVE UNIT |
Dispersion |
110? x 50? (H x V) |
Driver Complement |
4 x 100mm (4.00”) bass unit
1 x 25mm (1.00”) titanium tweeter |
CONSTRUCTION |
Enclosure |
7.88 litre MDF infinite baffle with perforated steel grille |
Finish |
Textured charcoal or white - paintable to any colour to match the install decor |
Connectors |
2 x Speakon NL4MP IN / OUT |
Fittings |
2 x M10 threaded inserts for i7Y & i7 MAB brackets |
Mounting Options |
Yoke (i7Y)
Multiple angle bracket (i7 MAB) |
Dimensions |
572 x 135 x 173.8mm
(22.52 x 5.31 x 6.84?€œ) |
Weight (each) |
9kg
(19lbs 13oz) |